Gravity: Flexible 16x16 RGB LED Matrix Introduction
Good news! There is a new member in to the Gravity family - The Flexible16x16 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Arduino I/O expansion shield.
This flexible 16x16 RGB full-color LED matrix module is based on WS2812 or SK6812 intelligent control LEDs. Each LED can be independently addressed..
I2C 16x2 Arduino LCD Display Module Introduction
This is an 16x2 LCD display screen with with I2C interface. It is able to display 16x2 characters on 2 lines, white characters on blue background.Usually, Arduino LCD display projects will run out of pin resources easily, especially with Arduino Uno. And it is also very complicated with the wire soldering and connection. This I2C 16x2 Arduino LCD Screen is using ..
0.96 Inch OLED Display Module For Raspberry Pi Introduction
Sometimes your Pi projects require a display to output system information, e.g. system status, temperature, IP address, etc. Having a full sized display attached is inconvenient if you want your project to be portable. Use this small OLED to output your required information and keep your product in a nice portable configuration. The display is a 0.96" 128 x 64 px OLED. The cont..
10.1" Diagonal - 1280x800 IPS HDMI/VGA/AV Display Introduction This 10.1 inch high-resolution 1280*800 IPS display is especially designed as a monitor for Lattepanda, Raspberry Pi and other mini PC. The HDMI/VGA/AV interfaces ensure its wide compatibility. Making a digital photo frame, playing a video, adding a face for your robot, you can expand your imagination, make more fun.
Note: A 7.5~12V DC power adapter is needed for..
2.7" OLED 12864 Display Module Introduction
We are always looking for a display with high picture quality and affordable cost. Thus almost all the OLED display available on the market are selected to compare size, color, material, workmanship, user experience and etc. At last we find this graceful display -- 2.7 inch, white color, good image quality, wide viewing angles, black mental frame, hard frosted surface and the most ..
2.8" TFT Touch Shield with 4MB Flash for Arduino and mbed Introduction Add some flavor to your Arduino / mbed project with this large colorful touch screen. This TFT Touch screen is a fantastic shield with big (2.8" diagonal) and 240x320 pixels with individual pixel control which could apply to Arduino and mbed. It also comes with micro SD slot and 4MB flash so you could add it easily to your projects with this 2.8" TFT Touch screen.
2.8” USB TFT Touch Display Screen for Raspberry Pi Introduction
In recent years, computing terminals have expanded exponentially from desktop to portable handheld devices. We have witnessed the rapid development of these devices. Complex operating systems being ported to tiny embedded hardware like Raspberry Pi, Cubieboard, routers with openWRT, etc. Those devices that has managed to become compact and easy to carry have being wide spread prod..
3.5" TFT Resistive Touch Shield with 4MB Flash for Arduino and mbed Introduction
Add some flavor to your Arduino / mbed project with this large colorful touch screen. This TFT Touch screen for Arduino is a fantastic shield with big (3.5" diagonal) and 240x320 pixels with individual pixel control which could apply to Arduino and mbed. It also comes with micro SD slot and 4MB flash so you could add it easily to your projects with this 3.5" TFT Touch scre..
4.3 Inch E-Paper 800x600 Introduction
This is a 4.3-inch e-ink display module, supports a maximum resolution of 800x600, using serial communication, built-in Chinese and English fonts. It also supports low power consumption mode. If you don't want to know the complex working theory of E-ink screen, or the algorithms of graphics, text, and pictures, it will be your best choice. You only need a serial port to implemen..
7 Segment LED Keypad Shield For Arduino Introduction
This 7 segment LED Keypad Shield is an Arduino LCD Shield with a 4 digit 7 segment digital tube display (common cathode). It has 5 buttons that can be used as menu select buttons or control buttons, using I2C to drive the digital tube for an easy user experience.
Working voltage: 5V
4 digit 8 segment common cathode digital tube (0.56 i..
7" Diagonal - 1280x800 IPS HDMI/VGA/AV Display Introduction
So you have a Raspberry Pi, a MK802 series or a Cubieboard? Cool. You hacked it and had it working as a mini pc? Cooler. But wait, a computer has a screen, literally. Why not try a beatutiful 7" diagonal-1280x800IPS HDMI/VGA/AV display? Connect a HDMI cable or pluging in directly the MK802(shown in picture) can make it work quickly.
A power adapter is needed ..
7-inch 1024x600 IPS Display for LattePanda Introduction Add exciting new dimensions to your project with this large full-color display. All you need to do is power your LattePanda board and you have a visual user interface for your project - no extra power cables required! The border of the display is insulated with black tape so that even without and enclosure there is no possibility of a short-circuit. The picture below shows LattePanda ..
Out Of Stock
7-inch Capacitive Touch Panel Overlay for LattePanda Display Introduction This is a capacitive touch panel overlay for the LattePanda board, overlay the panel on your LattePanda 7-inch display, power the board, and you will have a high-quality user interface for project.
Note: Here is a new batch of touch panel that have a higher sensibility. We've already updated the driver in the new pre-installed system. And early users can manu..
Accessory Shield for Arduino Introduction This Accessory Shield for Bluno is specially designed for Bluno (BLE with Arduino Uno), which is first of its kind in intergrating BT 4.0(BLE) module into Arduino Uno. It also compatible with standard Arduino Uno. With Bluno, this Accessory Shield forms an ideal prototyping platform for both software and hardware developers to go wireless. You will be able to develop your own s..
Arduino 1.77" SPI LCD Module with SD Introduction
The Arduino TFT screen is a backlit LCD screen with headers. You can draw text, images, and shapes to the screen with the TFT library. There is an onboard micro-SD card slot on the back of the screen that can store bitmap images to be displayed.
The screen's headers are designed to fit into the socket on the front of the Arduino Esplora; also it is compatible with any AVR-..
Basic 16x2 Character LCD - Black on Yellow 5V Introduction
Standard 16x2 character LCD display. It has a basic 16 character by 2 line display with a yellow background with black characters.
You could get a compatible LCD pannel or IIC LCD backpack here.
16x2 Character LCD x1